| Coolant Type | Water-based |
|---|---|
| Surface Finish | Ground |
| Coolant Hole Type | Straight |
| Coolant Hole Size | 2mm |
| Suitable For | High-speed Machining |
| Name | Tungsten Carbide Rods |
|---|---|
| Diameter | Customizable |
| Material | Carbide |
| Hardness | Customizable |
| Durability | Long-lasting |
| Suitable For | High-speed Machining |
|---|---|
| Coolant Hole Size | 2mm |
| Coolant Type | Water-based |
| Coolant Hole Type | Straight |
| Surface Finish | Ground |
| Coolant Hole Type | Straight |
|---|---|
| Coolant Type | Water Based |
| Material | Carbide |
| Coolant Hole Position | Center |
| Surface Finish | Ground |
| Coolant Hole Type | Straight |
|---|---|
| Material | Carbide |
| Suitable For | High-speed Machining |
| Coolant Hole Position | Center |
| Surface Finish | Ground |
| Name | Solid Carbide Gun Drill |
|---|---|
| HRA | 82.5-95 |
| Density | 13.12-15.58 |
| Cobalt Content | 5-17.5 |
| Corrosion Resistance | High |
| Features | High Wear Resistance/High Hardness/High Strength/Corrosion Resistance/ |
|---|---|
| Length | 50-330mm |
| Standard | ISO/GB/ANSI/DIN/JIS |
| Fracture Toughness | 7-10 MPa·m1/2 |
| Density | 14.5-15.9 G/cm3 |
| Features | High Wear Resistance/High Hardness/High Strength/Corrosion Resistance/ |
|---|---|
| Fracture Toughness | 7-10 MPa·m1/2 |
| Hardness | HRA 89-93 |
| Diameter | 2-50mm |
| Density | 14.5-15.9 G/cm3 |
| Features | High Wear Resistance/High Hardness/High Strength/Corrosion Resistance/ |
|---|---|
| Hardness | HRA 89-93 |
| Diameter | 2-50mm |
| Hrv | 91.2 |
| Dimention | Customized |
| Features | High Wear Resistance/High Hardness/High Strength/Corrosion Resistance/ |
|---|---|
| Hardness | HRA 89-93 |
| Hrv | 91.2 |
| Length | 50-330mm |
| Fracture Toughness | 7-10 MPa·m1/2 |
